laminate layer meaning in Chinese
层压层
Examples
- In order to reduce the theoretical manufacturing error and the quantity of slice sheet further , an adaptive slicing approach of changing the thickness of laminating layer is also presented
本文还提出采用变分层厚度优化分层进一步控制原理加工误差，减少分层板数量。 stl数据模型正确与否直接影响后续工艺的具体实现。 - The coating is applied to the surface of the glass , and in some cases ( to reduce deterioration of delicate coatings ) it must be installed on the side facing the cavity of sealed unit , or by applying a second laminating layer
镀层敷于玻璃表面，有时（为减少精细镀层的磨损）镀层必须安装在密封玻璃面向空腔的一侧，或附加一层薄膜。 - The effects of new lom process can increase the thickness of the laminating layer from 0 . 05 - 0 . 10mm to 1 . 0mm grade , almost same or lower theoretical manufacturing error and remaining material quantity than current lom process can also be gotten
在理论造型精度和残留加工量相近或更佳精度的条件下可以将分层厚度从现有的0 . 05 - 0 . 10mm提高到1 . 0mm数量级。